SOC 17-2141 · BLS relative AI exposure

Mechanical engineers

Also called Design Engineer · Product Engineer · Project Engineer · Engineer

Very high

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 53.2 million workers.

Workers, 2025
298,500
BLS projection to 2035
+11.2% projected
Median wage, 2025
$104,110
Typical education
Bachelor's degree

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

On a light page, end the frame’s address with ?theme=light. Preview it light.

Cite
CSV Post on X

The 79 tasks O*NET lists · 6 seen in every usage sample · 49 never

In every sample 6 In half or more 5 In under half the samples 19 Never seen 49

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

+11.2% projected

  1. This job +11.2%
  2. Very high exposure +2.0%
  3. All 831 jobs +3.5%

From 298,500 to 332,000. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Mechanical Engineering

+68% since February 2020

As a table
MonthMechanical EngineeringMedian sector
Feb 2020 99.9 100.0
Feb 2021 98.5 104.2
Feb 2022 173.6 172.0
Feb 2023 158.2 146.2
Feb 2024 144.1 119.9
Feb 2025 117.6 108.8
Feb 2026 130.9 106.6
2 October 2026 167.9 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

16%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 5 points above the median job (11%)

10–28% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 79 tasks, most often seen first
  1. Recommend design modifications to eliminate machine or system malfunctions. 7 of 7
  2. Provide technical customer service. 7 of 7
  3. Write technical reports or proposals related to engineering projects. 7 of 7
  4. Prepare or present technical or project status reports. 7 of 7
  5. Develop calibration methodologies, test methodologies, or tools. 7 of 7
  6. Write, review, or maintain engineering documentation. 7 of 7
  7. Read and interpret blueprints, technical drawings, schematics, or computer-generated reports. 6 of 7
  8. Develop or implement operating methods or procedures. 5 of 7
  9. Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications. 4 of 7
  10. Solicit new business. 4 of 7
  11. Research or implement green automotive technologies involving alternative fuels, electric or hybrid cars, or lighter or more fuel-efficient vehicles. 4 of 7
  12. Investigate equipment failures or difficulties to diagnose faulty operation and recommend remedial actions. 3 of 7
  13. Assist drafters in developing the structural design of products, using drafting tools or computer-assisted drafting equipment or software. 2 of 7
  14. Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems. 2 of 7
  15. Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification. 2 of 7
  16. Provide feedback to design engineers on customer problems or needs. 2 of 7
  17. Write performance requirements for product development or engineering projects. 2 of 7
  18. Provide technical consultation or direction related to the development or production of fuel cell systems. 2 of 7
  19. Simulate or model fuel cell, motor, or other system information, using simulation software programs. 2 of 7
  20. Provide technical direction to other engineers or engineering support personnel. 2 of 7
  21. Establish production or quality control standards. 2 of 7
  22. Build models for algorithm or control feature verification testing. 2 of 7
  23. Develop or integrate control feature requirements. 2 of 7
  24. Research computerized automotive applications, such as telemetrics, intelligent transportation systems, artificial intelligence, or automatic control. 2 of 7
  25. Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements. 1 of 7
  26. Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information. 1 of 7
  27. Apply engineering principles or practices to emerging fields, such as robotics, waste management, or biomedical engineering. 1 of 7
  28. Study industrial processes to maximize the efficiency of equipment applications, including equipment placement. 1 of 7
  29. Design or analyze automobile systems in areas such as aerodynamics, alternate fuels, ergonomics, hybrid power, brakes, transmissions, steering, calibration, safety, or diagnostics. 1 of 7
  30. Develop engineering specifications or cost estimates for automotive design concepts. 1 of 7
  31. Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations. 0 of 7
  32. Oversee installation, operation, maintenance, or repair to ensure that machines or equipment are installed and functioning according to specifications. 0 of 7
  33. Estimate costs or submit bids for engineering, construction, or extraction projects. 0 of 7
  34. Develop, coordinate, or monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs. 0 of 7
  35. Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency. 0 of 7
  36. Calculate energy losses for buildings, using equipment such as computers, combustion analyzers, or pressure gauges. 0 of 7
  37. Recommend the use of utility or energy services that minimize carbon footprints. 0 of 7
  38. Perform personnel functions, such as supervision of production workers, technicians, technologists, or other engineers. 0 of 7
  39. Direct the installation, operation, maintenance, or repair of renewable energy equipment, such as heating, ventilating, and air conditioning (HVAC) or water systems. 0 of 7
  40. Select or install combined heat units, power units, cogeneration equipment, or trigeneration equipment that reduces energy use or pollution. 0 of 7
  41. Evaluate mechanical designs or prototypes for energy performance or environmental impact. 0 of 7
  42. Design test control apparatus or equipment or develop procedures for testing products. 0 of 7
  43. Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition. 0 of 7
  44. Plan or conduct experiments to validate new materials, optimize startup protocols, reduce conditioning time, or examine contaminant tolerance. 0 of 7
  45. Characterize component or fuel cell performances by generating operating maps, defining operating conditions, identifying design refinements, or executing durability assessments. 0 of 7
  46. Plan or implement fuel cell cost reduction or product improvement projects in collaboration with other engineers, suppliers, support personnel, or customers. 0 of 7
  47. Conduct fuel cell testing projects, using fuel cell test stations, analytical instruments, or electrochemical diagnostics, such as cyclic voltammetry or impedance spectroscopy. 0 of 7
  48. Analyze fuel cell or related test data, using statistical software. 0 of 7
  49. Conduct post-service or failure analyses, using electromechanical diagnostic principles or procedures. 0 of 7
  50. Define specifications for fuel cell materials. 0 of 7
  51. Recommend or implement changes to fuel cell system designs. 0 of 7
  52. Validate design of fuel cells, fuel cell components, or fuel cell systems. 0 of 7
  53. Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products. 0 of 7
  54. Prepare test stations, instrumentation, or data acquisition systems for use in specific tests of fuel cell components or systems. 0 of 7
  55. Develop fuel cell materials or fuel cell test equipment. 0 of 7
  56. Fabricate prototypes of fuel cell components, assemblies, stacks, or systems. 0 of 7
  57. Manage fuel cell battery hybrid system architecture, including sizing of components, such as fuel cells, energy storage units, or electric drives. 0 of 7
  58. Design or implement fuel cell testing or development programs. 0 of 7
  59. Design fuel cell systems, subsystems, stacks, assemblies, or components, such as electric traction motors or power electronics. 0 of 7
  60. Identify or define vehicle and system integration challenges for fuel cell vehicles. 0 of 7
  61. Calculate the efficiency or power output of a fuel cell system or process. 0 of 7
  62. Coordinate fuel cell engineering or test schedules with departments outside engineering, such as manufacturing. 0 of 7
  63. Authorize release of fuel cell parts, components, or subsystems for production. 0 of 7
  64. Evaluate the power output, system cost, or environmental impact of new hydrogen or non-hydrogen fuel cell system designs. 0 of 7
  65. Integrate electric drive subsystems with other vehicle systems to optimize performance or mitigate faults. 0 of 7
  66. Develop or evaluate systems or methods of hydrogen storage for fuel cell applications. 0 of 7
  67. Conduct or direct system-level automotive testing. 0 of 7
  68. Perform failure, variation, or root cause analyses. 0 of 7
  69. Calibrate vehicle systems, including control algorithms or other software systems. 0 of 7
  70. Conduct research studies to develop new concepts in the field of automotive engineering. 0 of 7
  71. Alter or modify designs to obtain specified functional or operational performance. 0 of 7
  72. Create design alternatives for vehicle components, such as camless or dual-clutch engines or alternative air-conditioning systems, to increase fuel efficiency. 0 of 7
  73. Conduct automotive design reviews. 0 of 7
  74. Design vehicles that use lighter materials, such as aluminum, magnesium alloy, or plastic, to improve fuel efficiency. 0 of 7
  75. Develop specifications for vehicles powered by alternative fuels or alternative power methods. 0 of 7
  76. Coordinate production activities with other functional units, such as procurement, maintenance, or quality control. 0 of 7
  77. Design control systems or algorithms for purposes such as automotive energy management, emissions management, or increased operational safety or performance. 0 of 7
  78. Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new automotive technology or competitive products. 0 of 7
  79. Design vehicles for increased recyclability or use of natural, renewable, or recycled materials in vehicle construction. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 16% 14%
Feb–Mar 2025 15% 14%
Aug 2025 10% 10%
Nov 2025 13% 13%
Feb 2026 16% 12%
Apr 2026 25% 8%
May 2026 28% 11%
The 108 other titles O*NET lists for this job, A to Z
  • Air Conditioning Engineer (AC Engineer)
  • Application Engineer
  • Automation Engineer
  • Automotive Designer
  • Automotive Engineer
  • Automotive Engineers
  • Automotive Power Electronics Engineer
  • Automotive Project Engineer
  • Automotive Quality Engineer
  • Automotive Systems Engineer
  • Body Engineer
  • Brake Engineer
  • Car Designer
  • Combustion Engineer
  • Cooling and Heating Systems Design Engineer
  • Cryogenics Engineer
  • Customer Quality Engineer
  • Design Cell Engineer
  • Design Engineer
  • Design Release Engineer
  • Diesel Engineer
  • Diesel Retrofit Designer
  • Dimensional Integration Engineer
  • Distribution Engineer
  • Dust Control Engineer
  • Electromechanical Engineer
  • Engine Designer
  • Engineer
  • Equipment Engineer
  • Erecting Engineer
  • Facilities Mechanical Design Engineer
  • Field Service Engineer
  • Fuel Cell Designer
  • Fuel Cell Engineer
  • Fuel Cell Engineers
  • Fuel Cell Systems Engineer
  • Fuel Cell Test Engineer
  • Fuel-Efficient Automobile Designer
  • Geothermal Power Generation Mechanical Engineer
  • Heating and Cooling Systems Engineer
  • Heating Engineer
  • HVAC Design Mechanical Engineer (Heating, Ventilation, and Air Conditioning Design Mechanical Engineer)
  • HVAC Engineer (Heating Ventilation Air Conditioning Engineer)
  • HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
  • HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
  • Hybrid Powertrain Development Engineer
  • Hydraulic Engineer
  • Hydroelectric Plant Mechanical Engineer
  • Industrial Green Systems Designer
  • Industrial Retrofit Designer
  • Installation Engineer
  • Internal Combustion Engineer
  • Low-Emission Automobile Designer
  • Machine Design Engineer
  • Machine Tool Designer
  • Mechanical Design Engineer
  • Mechanical Design Facilities Engineer
  • Mechanical Designer
  • Mechanical Development Engineer
  • Mechanical Engineer
  • Mechanical Engineering Intern
  • Mechanical Equipment Test Engineer
  • Mechanical Project Engineer
  • Mechanical Research Engineer
  • Motorcycle Designer
  • Plant Engineer
  • Plant Equipment Engineer
  • Powertrain Control Systems Engineer
  • Powertrain Engineer
  • Product Development Engineer
  • Product Engineer
  • Products Engineer
  • Products Mechanical Design Engineer
  • Project Engineer
  • Quality Assurance Engineer (QA Engineer)
  • Quality Engineer
  • Refrigeration Engineer
  • Reliability Engineer
  • Research and Development Engineer (R&D Engineer)
  • Research Engineer
  • Roller Coaster Designer
  • Roller Coaster Engineer
  • Servomechanism Designer
  • Sheet Metal Engineer
  • Space Battery Technician
  • Stack Engineer
  • Stress Analyst
  • Subsystems Engineer
  • Supplier Quality Engineer (SQE)
  • Systems Design Engineer
  • Systems Engineer
  • Test Engineer
  • Test Inspection Engineer
  • Textile Engineer
  • Tool and Die Engineer
  • Tool Design Engineer
  • Tool Designer
  • Tool Engineer
  • Tool Maker
  • Tooling Engineer
  • Transportation Design Engineer
  • Utilization Engineer
  • Vehicle Controls Engineer
  • Ventilating Engineer
  • Ventilating Expert
  • Weapons Designer
  • Weapons Engineer
  • Wind Turbine Mechanical Engineer

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.