SOC 51-4041 · BLS relative AI exposure

Machinists

Also called Computer Numeric Controlled Machinist · Maintenance Machinist · Tool Room Machinist

Moderate

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 44.7 million workers.

Workers, 2025
288,300
BLS projection to 2035
+1.0% projected
Median wage, 2025
$58,750
Typical education
High school diploma or equivalent

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

On a light page, end the frame’s address with ?theme=light. Preview it light.

Cite
CSV Post on X

The 29 tasks O*NET lists · 0 seen in every usage sample · 24 never

In every sample 0 In half or more 0 In under half the samples 5 Never seen 24

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

+1.0% projected

  1. This job +1.0%
  2. Moderate exposure +6.2%
  3. All 831 jobs +3.5%

From 288,300 to 291,200. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Production & Manufacturing

+24% since February 2020

As a table
MonthProduction & ManufacturingMedian sector
Feb 2020 100.5 100.0
Feb 2021 137.4 104.2
Feb 2022 201.6 172.0
Feb 2023 162.6 146.2
Feb 2024 132.5 119.9
Feb 2025 111.5 108.8
Feb 2026 118.6 106.6
2 October 2026 124.5 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

8%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 3 points below the median job (11%)

0–10% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 29 tasks, most often seen first
  1. Program computers or electronic instruments, such as numerically controlled machine tools. 2 of 7
  2. Evaluate machining procedures and recommend changes or modifications for improved efficiency or adaptability. 2 of 7
  3. Confer with engineering, supervisory, or manufacturing personnel to exchange technical information. 2 of 7
  4. Prepare working sketches for the illustration of product appearance. 2 of 7
  5. Advise clients about the materials being used for finished products. 2 of 7
  6. Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers. 0 of 2
  7. Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders. 0 of 7
  8. Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers. 0 of 7
  9. Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations. 0 of 7
  10. Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to fabricate products. 0 of 7
  11. Monitor the feed and speed of machines during the machining process. 0 of 7
  12. Maintain machine tools in proper operational condition. 0 of 7
  13. Fit and assemble parts to make or repair machine tools. 0 of 7
  14. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. 0 of 7
  15. Confer with numerical control programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications. 0 of 7
  16. Operate equipment to verify operational efficiency. 0 of 7
  17. Diagnose machine tool malfunctions to determine need for adjustments or repairs. 0 of 7
  18. Design fixtures, tooling, or experimental parts to meet special engineering needs. 0 of 7
  19. Dispose of scrap or waste material in accordance with company policies and environmental regulations. 0 of 7
  20. Lay out, measure, and mark metal stock to display placement of cuts. 0 of 7
  21. Separate scrap waste and related materials for reuse, recycling, or disposal. 0 of 7
  22. Check work pieces to ensure that they are properly lubricated or cooled. 0 of 7
  23. Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics. 0 of 2
  24. Install repaired parts into equipment or install new equipment. 0 of 7
  25. Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed. 0 of 7
  26. Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design. 0 of 2
  27. Set up or operate metalworking, brazing, heat-treating, welding, or cutting equipment. 0 of 7
  28. Establish work procedures for fabricating new structural products, using a variety of metalworking machines. 0 of 7
  29. Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants, or batteries into machines or mechanisms. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 8% 14%
Feb–Mar 2025 8% 14%
Aug 2025 0% 10%
Nov 2025 0% 13%
Feb 2026 0% 12%
Apr 2026 10% 8%
May 2026 10% 11%
The 52 other titles O*NET lists for this job, A to Z
  • Aircraft Machinist
  • Auto Machinist (Automotive Machinist)
  • Carbide Operator
  • CNC Lathe Machinist (Computer Numeric Controlled Lathe Machinist)
  • CNC Lathe Machinist (Computer Numerically Controlled Lathe Machinist)
  • CNC Machinist (Computer Numeric Controlled Machinist)
  • CNC Machinist (Computer Numerical Control Machinist)
  • CNC Machinist (Computer Numerically Controlled Machinist)
  • CNC Mill Machinist (Computer Numeric Controlled Mill Machinist)
  • CNC Mill Machinist (Computer Numerically Controlled Mill Machinist)
  • CNC Milling Machinist (Computer Numeric Control Milling Machinist)
  • CNC Swiss Machinist (Computer Numeric Controlled Swiss Machinist)
  • Conventional Machinist
  • Development Mechanic
  • Electrical Experimental Mechanic
  • Electrical Instrument Maker
  • Electrical Machinist
  • Experimental Machinist
  • Experimental Mechanic
  • Fixture Maker
  • Fluid-Power Mechanic
  • Four-Slide Operator
  • Gear Machinist
  • Geothermal Heat Pump Machinist
  • Hydroelectric Component Machinist
  • Instrument Maker
  • Instrument Maker and Repairer
  • Jobber
  • Laboratory Machinist (Lab Machinist)
  • Lathe Machinist
  • Light Fixture Maker
  • Machine Fitter
  • Machine Repair Person
  • Machinist
  • Maintenance Machinist
  • Manual Lathe Machinist
  • Manual Machinist
  • Mechanist
  • Metal Machinist
  • Outside Machinist
  • Outside Ship Machinist
  • Precision Instrument Maker
  • Precision Machinist
  • Printing Press Machinist
  • Production Machinist
  • Thermometer Maker
  • Tool and Die Machinist
  • Tool Machinist
  • Tool Room Machinist
  • Toolroom Machinist
  • Turret Lathe Machinist
  • Wind Turbine Machinist

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.