SOC 17-2199 · BLS relative AI exposure

Engineers, all other

Also called Energy Efficiency Engineer · Energy Engineer · Industrial Energy Engineer · Test and Balance Engineer

Very high

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 53.2 million workers.

Workers, 2025
166,700
BLS projection to 2035
+3.7% projected
Median wage, 2025
$122,930
Typical education
Bachelor's degree

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

On a light page, end the frame’s address with ?theme=light. Preview it light.

Cite
CSV Post on X

The 179 tasks O*NET lists · 9 seen in every usage sample · 110 never

In every sample 9 In half or more 31 In under half the samples 29 Never seen 110

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

+3.7% projected

  1. This job +3.7%
  2. Very high exposure +2.0%
  3. All 831 jobs +3.5%

From 166,700 to 173,000. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Industrial Engineering

+23% since February 2020

As a table
MonthIndustrial EngineeringMedian sector
Feb 2020 100.6 100.0
Feb 2021 102.4 104.2
Feb 2022 188.9 172.0
Feb 2023 140.7 146.2
Feb 2024 109.8 119.9
Feb 2025 88.4 108.8
Feb 2026 97.5 106.6
2 October 2026 123.1 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

23%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 12 points above the median job (11%)

10–32% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 179 tasks, most often seen first
  1. Identify and recommend energy savings strategies to achieve more energy-efficient operation. 2 of 2
  2. Advise clients or colleagues on topics such as climate control systems, energy modeling, data logging, sustainable design, or energy auditing. 2 of 2
  3. Prepare energy-related project reports or related documentation. 2 of 2
  4. Analyze existing development or manufacturing procedures and suggest improvements. 7 of 7
  5. Analyze system performance or operational requirements. 7 of 7
  6. Design software to control robotic systems for applications, such as military defense or manufacturing. 7 of 7
  7. Provide scientific or technical guidance or expertise to scientists, engineers, technologists, technicians, or others, using knowledge of chemical, analytical, or biological processes as applied to micro and nanoscale systems. 7 of 7
  8. Prepare reports, deliver presentations, or participate in program review activities to communicate engineering results or recommendations. 7 of 7
  9. Write proposals to secure external funding or to partner with other companies. 7 of 7
  10. Provide consultation or training on topics such as mechatronics or automated control. 6 of 7
  11. Develop customer documentation, such as performance specifications, training manuals, or operating instructions. 6 of 7
  12. Monitor and analyze energy consumption. 5 of 7
  13. Analyze, interpret, or create graphical representations of energy data, using engineering software. 5 of 7
  14. Promote awareness or use of alternative or renewable energy sources. 5 of 7
  15. Research, select, or apply sensors, communication technologies, or control devices for motion control, position sensing, pressure sensing, or electronic communication. 5 of 7
  16. Create schematics and physical layouts of integrated microelectromechanical systems (MEMS) components or packaged assemblies consistent with process, functional, or package constraints. 5 of 7
  17. Investigate characteristics such as cost, performance, or process capability of potential microelectromechanical systems (MEMS) device designs, using simulation or modeling software. 5 of 7
  18. Propose product designs involving microelectromechanical systems (MEMS) technology, considering market data or customer requirements. 5 of 7
  19. Develop formal documentation for microelectromechanical systems (MEMS) devices, including quality assurance guidance, quality control protocols, process control checklists, data collection, or reporting. 5 of 7
  20. Conduct experimental or virtual studies to investigate characteristics and processing principles of potential microelectromechanical systems (MEMS) technology. 5 of 7
  21. Develop or validate specialized materials characterization procedures, such as thermal withstand, fatigue, notch sensitivity, abrasion, or hardness tests. 5 of 7
  22. Design, integrate, or test photonics systems or components. 5 of 7
  23. Conduct testing to determine functionality or optimization or to establish limits of photonics systems or components. 5 of 7
  24. Conduct research on new photonics technologies. 5 of 7
  25. Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices. 5 of 7
  26. Debug robotics programs. 5 of 7
  27. Provide technical support for robotic systems. 5 of 7
  28. Design robotic systems, such as automatic vehicle control, autonomous vehicles, advanced displays, advanced sensing, robotic platforms, computer vision, or telematics systems. 5 of 7
  29. Document robotic application development, maintenance, or changes. 5 of 7
  30. Write algorithms or programming code for ad hoc robotic applications. 5 of 7
  31. Provide technical guidance or support to customers on topics such as nanosystem start-up, maintenance, or use. 5 of 7
  32. Integrate nanotechnology with antimicrobial properties into products, such as household or medical appliances, to reduce the development of bacteria or other microbes. 5 of 7
  33. Inspect or monitor energy systems, including heating, ventilating, and air conditioning (HVAC) or daylighting systems to determine energy use or potential energy savings. 4 of 7
  34. Create embedded software design programs. 4 of 7
  35. Create or maintain formal engineering documents, such as schematics, bills of materials, components or materials specifications, or packaging requirements. 4 of 7
  36. Design or develop energy products using nanomaterials or nanoprocesses, such as micro-nano machining. 4 of 7
  37. Design electro-optical sensing or imaging systems. 4 of 7
  38. Review or approve designs, calculations, or cost estimates. 4 of 7
  39. Apply nanotechnology to improve the performance or reduce the environmental impact of energy products, such as fuel cells or solar cells. 4 of 7
  40. Write reports or proposals related to photonics research or development projects. 1 of 2
  41. Design advanced precision equipment for accurate or controlled applications. 3 of 7
  42. Design engineering systems for the automation of industrial tasks. 3 of 7
  43. Maintain technical project files. 3 of 7
  44. Implement or test design solutions. 2 of 7
  45. Design, develop, or implement control circuits or algorithms for electromechanical or pneumatic devices or systems. 2 of 7
  46. Identify, procure, or develop test equipment, instrumentation, or facilities for characterization of microelectromechanical systems (MEMS) applications. 2 of 7
  47. Develop or validate product-specific test protocols, acceptance thresholds, or inspection tools for quality control testing or performance measurement. 2 of 7
  48. Determine applications of photonics appropriate to meet product objectives or features. 2 of 7
  49. Oversee or provide expertise on manufacturing, assembly, or fabrication processes. 2 of 7
  50. Install, calibrate, operate, or maintain robots. 2 of 7
  51. Conduct research into the feasibility, design, operation, or performance of robotic mechanisms, components, or systems, such as planetary rovers, multiple mobile robots, reconfigurable robots, or man-machine interactions. 2 of 7
  52. Make system device lists or event timing charts. 2 of 7
  53. Plan mobile robot paths and teach path plans to robots. 2 of 7
  54. Conduct research related to a range of nanotechnology topics, such as packaging, heat transfer, fluorescence detection, nanoparticle dispersion, hybrid systems, liquid systems, nanocomposites, nanofabrication, optoelectronics, or nanolithography. 2 of 7
  55. Provide technical direction or support to installation teams during installation, start-up, testing, system commissioning, or performance monitoring. 2 of 7
  56. Train personnel or clients on topics such as energy management. 1 of 7
  57. Write or install energy management routines for building automation systems. 1 of 7
  58. Publish engineering reports documenting design details or qualification test results. 1 of 7
  59. Monitor or calibrate automated systems, industrial control systems, or system components to maximize efficiency of production. 1 of 7
  60. Plan or schedule engineering research or development projects involving microelectromechanical systems (MEMS) technology. 1 of 7
  61. Develop or test photonic prototypes or models. 1 of 7
  62. Read current literature, talk with colleagues, continue education, or participate in professional organizations or conferences to keep abreast of developments in the field. 1 of 7
  63. Analyze, fabricate, or test fiber-optic links. 1 of 7
  64. Conduct research on robotic technology to create new robotic systems or system capabilities. 1 of 7
  65. Design or conduct tests of new nanotechnology products, processes, or systems. 1 of 7
  66. Identify new applications for existing nanotechnologies. 1 of 7
  67. Design or engineer nanomaterials, nanodevices, nano-enabled products, or nanosystems, using three-dimensional computer-aided design (CAD) software. 1 of 7
  68. Analyze operation of wind farms or wind farm components to determine reliability, performance, and compliance with specifications. 1 of 7
  69. Develop design specifications and functional requirements for residential, commercial, or industrial solar energy systems or components. 1 of 7
  70. Conduct energy audits to evaluate energy use and to identify conservation and cost reduction measures. 0 of 2
  71. Monitor energy related design or construction issues, such as energy engineering, energy management, or sustainable design. 0 of 2
  72. Verify energy bills and meter readings. 0 of 2
  73. Collect data for energy conservation analyses, using jobsite observation, field inspections, or sub-metering. 0 of 2
  74. Manage the development, design, or construction of energy conservation projects to ensure acceptability of budgets and time lines, conformance to federal and state laws, or adherence to approved specifications. 0 of 7
  75. Perform energy modeling, measurement, verification, commissioning, or retro-commissioning. 0 of 7
  76. Review architectural, mechanical, or electrical plans or specifications to evaluate energy efficiency. 0 of 2
  77. Review or negotiate energy purchase agreements. 0 of 7
  78. Direct the implementation of energy management projects. 0 of 2
  79. Research renewable or alternative energy systems or technologies, such as solar thermal or photovoltaic energy. 0 of 2
  80. Recommend best fuel for specific sites or circumstances. 0 of 2
  81. Consult with construction or renovation clients or other engineers on topics such as Leadership in Energy and Environmental Design (LEED) or Green Buildings. 0 of 7
  82. Create mechanical design documents for parts, assemblies, or finished products. 0 of 7
  83. Identify materials appropriate for mechatronic system designs. 0 of 2
  84. Apply mechatronic or automated solutions to the transfer of materials, components, or finished goods. 0 of 7
  85. Oversee the work of contractors in accordance with project requirements. 0 of 7
  86. Upgrade the design of existing devices by adding mechatronic elements. 0 of 7
  87. Create mechanical models to simulate mechatronic design concepts. 0 of 2
  88. Determine the feasibility, costs, or performance benefits of new mechatronic equipment. 0 of 2
  89. Develop electronic, mechanical, or computerized processes to perform tasks in dangerous situations, such as underwater exploration or extraterrestrial mining. 0 of 7
  90. Design advanced electronic control systems for mechanical systems. 0 of 7
  91. Design self-monitoring mechanical systems, such as gear systems that monitor loading or condition of systems to detect and prevent failures. 0 of 7
  92. Design or develop automated control systems for environmental applications, such as waste processing, air quality, or water quality systems. 0 of 7
  93. Design mechatronics components for computer-controlled products, such as cameras, video recorders, automobiles, or airplanes. 0 of 7
  94. Conduct analyses addressing issues such as failure, reliability, or yield improvement. 0 of 7
  95. Communicate operating characteristics or performance experience to other engineers or designers for training or new product development purposes. 0 of 7
  96. Evaluate materials, fabrication methods, joining methods, surface treatments, or packaging to ensure acceptable processing, performance, cost, sustainability, or availability. 0 of 7
  97. Refine final microelectromechanical systems (MEMS) design to optimize design for target dimensions, physical tolerances, or processing constraints. 0 of 7
  98. Conduct harsh environmental testing, accelerated aging, device characterization, or field trials to validate devices, using inspection tools, testing protocols, peripheral instrumentation, or modeling and simulation software. 0 of 7
  99. Develop or file intellectual property and patent disclosure or application documents related to microelectromechanical systems (MEMS) devices, products, or systems. 0 of 7
  100. Conduct or oversee the conduct of prototype development or microfabrication activities to ensure compliance to specifications and promote effective production processes. 0 of 7
  101. Devise microelectromechanical systems (MEMS) production methods, such as integrated circuit fabrication, lithographic electroform modeling, or micromachining. 0 of 7
  102. Validate fabrication processes for microelectromechanical systems (MEMS), using statistical process control implementation, virtual process simulations, data mining, or life testing. 0 of 7
  103. Demonstrate miniaturized systems that contain components, such as microsensors, microactuators, or integrated electronic circuits, fabricated on silicon or silicon carbide wafers. 0 of 2
  104. Manage new product introduction projects to ensure effective deployment of microelectromechanical systems (MEMS) devices or applications. 0 of 7
  105. Conduct acceptance tests, vendor-qualification protocols, surveys, audits, corrective-action reviews, or performance monitoring of incoming materials or components to ensure conformance to specifications. 0 of 7
  106. Develop or implement microelectromechanical systems (MEMS) processing tools, fixtures, gages, dies, molds, or trays. 0 of 7
  107. Oversee operation of microelectromechanical systems (MEMS) fabrication or assembly equipment, such as handling, singulation, assembly, wire-bonding, soldering, or package sealing. 0 of 7
  108. Consider environmental issues when proposing product designs involving microelectromechanical systems (MEMS) technology. 0 of 7
  109. Design or develop industrial air quality microsystems, such as carbon dioxide fixing devices. 0 of 7
  110. Design or develop sensors to reduce the energy or resource requirements to operate appliances, such as washing machines or dishwashing machines. 0 of 7
  111. Design sensors or switches that require little or no power to operate for environmental monitoring or industrial metering applications. 0 of 7
  112. Research or develop emerging microelectromechanical (MEMS) systems to convert nontraditional energy sources into power, such as ambient energy harvesters that convert environmental vibrations into usable energy. 0 of 7
  113. Develop optical or imaging systems, such as optical imaging products, optical components, image processes, signal process technologies, or optical systems. 0 of 7
  114. Assist in the transition of photonic prototypes to production. 0 of 7
  115. Document photonics system or component design processes, including objectives, issues, or outcomes. 0 of 2
  116. Design photonics products, such as light sources, displays, or photovoltaics, to achieve increased energy efficiency. 0 of 2
  117. Train operators, engineers, or other personnel. 0 of 7
  118. Design gas lasers, solid state lasers, infrared, or other light emitting or light sensitive devices. 0 of 7
  119. Create or maintain photonic design histories. 0 of 7
  120. Design solar energy photonics or other materials or devices to generate energy. 0 of 7
  121. Design or redesign optical fibers to minimize energy loss. 0 of 7
  122. Develop photonics sensing or manufacturing technologies to improve the efficiency of manufacturing or related processes. 0 of 7
  123. Develop laser-processed designs, such as laser-cut medical devices. 0 of 7
  124. Design or develop new crystals for photonics applications. 0 of 7
  125. Design laser machining equipment for purposes such as high-speed ablation. 0 of 2
  126. Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment. 0 of 7
  127. Process or interpret signals or sensor data. 0 of 7
  128. Build, configure, or test robots or robotic applications. 0 of 2
  129. Create back-ups of robot programs or parameters. 0 of 7
  130. Design end-of-arm tooling. 0 of 7
  131. Supervise technologists, technicians, or other engineers. 0 of 2
  132. Investigate mechanical failures or unexpected maintenance problems. 0 of 7
  133. Integrate robotics with peripherals, such as welders, controllers, or other equipment. 0 of 7
  134. Evaluate robotic systems or prototypes. 0 of 2
  135. Design automated robotic systems to increase production volume or precision in high-throughput operations, such as automated ribonucleic acid (RNA) analysis or sorting, moving, or stacking production materials. 0 of 7
  136. Design or program robotics systems for environmental clean-up applications to minimize human exposure to toxic or hazardous materials or to improve the quality or speed of clean-up operations. 0 of 7
  137. Design robotics applications for manufacturers of green products, such as wind turbines or solar panels, to increase production time, eliminate waste, or reduce costs. 0 of 2
  138. Automate assays on laboratory robotics. 0 of 7
  139. Supervise technologists or technicians engaged in nanotechnology research or production. 0 of 7
  140. Synthesize, process, or characterize nanomaterials, using advanced tools or techniques. 0 of 7
  141. Create designs or prototypes for nanosystem applications, such as biomedical delivery systems or atomic force microscopes. 0 of 7
  142. Generate high-resolution images or measure force-distance curves, using techniques such as atomic force microscopy. 0 of 7
  143. Develop processes or identify equipment needed for pilot or commercial nanoscale scale production. 0 of 7
  144. Engineer production processes for specific nanotechnology applications, such as electroplating, nanofabrication, or epoxy. 0 of 7
  145. Design nano-enabled products with reduced toxicity, increased durability, or improved energy efficiency. 0 of 7
  146. Coordinate or supervise the work of suppliers or vendors in the designing, building, or testing of nanosystem devices, such as lenses or probes. 0 of 7
  147. Design nano-based manufacturing processes to minimize water, chemical, or energy use, as well as to reduce waste production. 0 of 7
  148. Design nanosystems with components such as nanocatalysts or nanofiltration devices to clean specific pollutants from hazardous waste sites. 0 of 7
  149. Prepare nanotechnology-related invention disclosures or patent applications. 0 of 7
  150. Reengineer nanomaterials to improve biodegradability. 0 of 7
  151. Develop catalysis or other green chemistry methods to synthesize nanomaterials, such as nanotubes, nanocrystals, nanorods, or nanowires. 0 of 7
  152. Design nanoparticle catalysts to detect or remove chemical or other pollutants from water, soil, or air. 0 of 7
  153. Develop green building nanocoatings, such as self-cleaning, anti-stain, depolluting, anti-fogging, anti-icing, antimicrobial, moisture-resistant, or ultraviolet protectant coatings. 0 of 7
  154. Create or maintain wind farm layouts, schematics, or other visual documentation for wind farms. 0 of 7
  155. Recommend process or infrastructure changes to improve wind turbine performance, reduce operational costs, or comply with regulations. 0 of 7
  156. Create models to optimize the layout of wind farm access roads, crane pads, crane paths, collection systems, substations, switchyards, or transmission lines. 0 of 7
  157. Provide engineering technical support to designers of prototype wind turbines. 0 of 7
  158. Investigate experimental wind turbines or wind turbine technologies for properties such as aerodynamics, production, noise, and load. 0 of 7
  159. Develop active control algorithms, electronics, software, electromechanical, or electrohydraulic systems for wind turbines. 0 of 7
  160. Develop specifications for wind technology components, such as gearboxes, blades, generators, frequency converters, or pad transformers. 0 of 2
  161. Test wind turbine components, using mechanical or electronic testing equipment. 0 of 7
  162. Oversee the work activities of wind farm consultants or subcontractors. 0 of 7
  163. Test wind turbine equipment to determine effects of stress or fatigue. 0 of 7
  164. Monitor wind farm construction to ensure compliance with regulatory standards or environmental requirements. 0 of 7
  165. Direct balance of plant (BOP) construction, generator installation, testing, commissioning, or supervisory control and data acquisition (SCADA) to ensure compliance with specifications. 0 of 7
  166. Perform root cause analysis on wind turbine tower component failures. 0 of 7
  167. Design underground or overhead wind farm collector systems. 0 of 7
  168. Write reports to document wind farm collector system test results. 0 of 7
  169. Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of residential or commercial solar power systems. 0 of 7
  170. Create plans for solar energy system development, monitoring, and evaluation activities. 0 of 7
  171. Design or coordinate design of photovoltaic (PV) or solar thermal systems, including system components, for residential and commercial buildings. 0 of 7
  172. Create electrical single-line diagrams, panel schedules, or connection diagrams for solar electric systems, using computer-aided design (CAD) software. 0 of 7
  173. Perform computer simulation of solar photovoltaic (PV) generation system performance or energy production to optimize efficiency. 0 of 7
  174. Review specifications and recommend engineering or manufacturing changes to achieve solar design objectives. 0 of 7
  175. Develop standard operation procedures and quality or safety standards for solar installation work. 0 of 7
  176. Create checklists for review or inspection of completed solar installation projects. 0 of 7
  177. Perform thermal, stress, or cost reduction analyses for solar systems. 0 of 7
  178. Test or evaluate photovoltaic (PV) cells or modules. 0 of 7
  179. Design or develop vacuum tube collector systems for solar applications. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 29% 14%
Feb–Mar 2025 32% 14%
Aug 2025 23% 10%
Nov 2025 25% 13%
Feb 2026 23% 12%
Apr 2026 10% 8%
May 2026 12% 11%
The 199 other titles O*NET lists for this job, A to Z
  • Algorithm Developer
  • Algorithm Engineer
  • Alternative Energy Engineer
  • Application Engineer
  • Applications Engineer
  • Arrhythmia Engineer
  • Automation Application Engineer
  • Automation Designer
  • Automation Engineer
  • Autonomous Vehicle Design Engineer
  • Autonomy Engineer
  • Bioengineer
  • Biomedical Engineer
  • Carbon Analyst
  • Carbon Specialist
  • Certified Green Building Engineer
  • Coastal Engineer
  • Commercial Engineer
  • Consulting Engineer
  • Control Integration Engineer
  • Control Systems Engineer
  • Controls Engineer
  • Controls Engineering Specialist
  • Corrosion Control Engineer
  • Design Engineer
  • Design Engineer (Design Eng)
  • Device Engineer
  • Director Engineering
  • Distribution Engineer
  • Durability Engineer
  • DWDM Optical Network Engineer (Dense Wavelength Division Multiplexing Optical Network Engineer)
  • Electro-Mechanical Engineer
  • Electro-Mechanical Systems Control Engineer
  • Electro-optical Engineer
  • Electro-optics Engineer
  • Energy Conservation Engineer
  • Energy Efficiency Engineer
  • Energy Engineer
  • Energy Engineers, Except Wind and Solar
  • Energy Infrastructure Engineer
  • Energy Market Analyst
  • Energy Modeler
  • Energy Project Engineer
  • Energy Systems Engineer
  • Engineer
  • Engineering Analyst
  • Engineering Consultant
  • Equipment Engineer
  • Factory Automations Engineer
  • Fiber Optics Engineer
  • Full Stack Engineer
  • GaN Device Engineer (Gallium Nitride Device Engineer)
  • Green Building Energy Engineer
  • Green Building Engineer
  • Heating Engineer
  • HVAC Engineer (Heating, Ventilation and Air Conditioning Engineer)
  • HVAC Engineer (Heating, Ventilation, and Air Conditioning Engineer)
  • HVAC Sensor and Digital Control Designer (Heating, Ventilation and Air Conditioning Sensor and Digital Control Designer)
  • Hydrodynamicist
  • Hydroelectric Plant Power Generation Engineer
  • Hydrogen Power Plant Engineer
  • Industrial Energy Engineer
  • Intelligent Systems Engineer
  • Laser Engineer
  • Laser Systems Engineer
  • Maintainability Engineer
  • Mathematical Engineer
  • Measurement And Verification Engineer
  • Mechanical Systems Control Engineer
  • Mechatronic Engineer
  • Mechatronics Engineer
  • Mechatronics Engineers
  • Medical Device Engineer
  • MEMS Device Scientist (Microelectromechanical Systems Device Scientist)
  • MEMS Engineer (Microelectromechanical Systems Engineer)
  • MEMS Integration Engineer (Microelectrical Mechanical Integration Engineer)
  • MEMS Process Engineer (Microelectromechanical Systems Process Engineer)
  • Metrologist
  • Microelectronics Engineer
  • Microsystems Engineer
  • Microsystems Engineers
  • Mobile Device Engineer
  • Mobile Engineer
  • Nanoelectronics Engineer
  • Nanofabrication Engineer
  • Nanofabrication Research Engineer
  • Nanoindentation Applications Engineer
  • Nanomaterials Research Scientist
  • Nanomaterials Synthesis Research Scientist
  • Nanosystems Engineer
  • Nanosystems Engineers
  • Nanotechnologist
  • Nanotechnology Engineer
  • Nanotechnology Materials Scientist
  • Nanotechnology Specialist
  • Ocean Engineer
  • Optical Design Engineer
  • Optical Engineer
  • Optical Network Engineer
  • Optical Specialist
  • Optical Systems Engineer
  • Optical Test Engineer
  • Optics Engineer
  • Optimization Engineer
  • Optoelectronics Engineer
  • Optomechanical Engineer
  • Ordnance Engineer
  • Packaging Engineer
  • Patent Engineer
  • Photographic Engineer
  • Photonics Engineer
  • Photonics Engineers
  • Photovoltaic Power Systems Engineer
  • Photovoltaic System Designer (PV System Designer)
  • Power Systems Engineer
  • Process Controls Engineer
  • Process Development Engineer
  • Process Engineer
  • Product Design Engineer
  • Project Design Engineer
  • Project Engineer
  • Quantum Materials Research Engineer
  • Radio Frequency Design Engineer (RF Design Engineer)
  • Refrigeration Engineer
  • Reliability Engineer
  • Renewable Energy Engineer
  • Renewable Energy Specialist
  • Research and Development Engineer (R and D Engineer)
  • Research Engineer
  • Robot Operator
  • Robotic Process Automation Analyst
  • Robotic Systems Engineer
  • Robotics Application Engineer
  • Robotics Controls Engineer
  • Robotics Engineer
  • Robotics Engineering Intern
  • Robotics Engineers
  • Robotics Specialist
  • Robotics Systems Engineer
  • Robotics Technician (Robotics Tech)
  • RPA Engineer (Robotic Process Automation Engineer)
  • Salvage Engineer
  • SCADA Engineer (Supervisory Control and Data Acquisition)
  • Semiconductor Engineer
  • Semiconductor Radiation Effects Engineer
  • Semiconductor Test Engineer
  • Service Engineer
  • Smart Grid Engineer
  • Solar Applications Development Engineer
  • Solar Array Engineer
  • Solar Design Engineer
  • Solar Designer
  • Solar Development Engineer
  • Solar Energy Advisor
  • Solar Energy Contractor
  • Solar Energy Engineer
  • Solar Energy Systems Designer
  • Solar Energy Systems Engineer
  • Solar Energy Systems Engineers
  • Solar Engineer
  • Solar Mechanical Engineer
  • Solar Performance Engineer
  • Solar Process Engineer
  • Solar Professional Engineer (Solar PE)
  • Solar Project Engineer
  • Solar PV Designer (Solar Photovoltaic Designer)
  • Solar PV Engineer (Solar Photovoltaic Engineer)
  • Solar PV Product Development Engineer (Solar Photovoltaic Product Development Engineer)
  • Solar PV Systems Engineer (Solar Photovoltaic Systems Engineer)
  • Solar Systems Designer
  • Staff Field Engineer
  • Sustainability Engineer
  • System Development Engineer
  • System Engineer
  • Systems Engineer
  • Technical Engineer
  • Technical Testing Engineer
  • Test and Balance Engineer
  • Test Engineer
  • Testing Engineer
  • Traffic Engineer
  • Turbine Engineer
  • Turbine Measurements Engineer
  • Utility Engineer
  • Utility Scale Engineer
  • Wind Energy Consultant
  • Wind Energy Engineer
  • Wind Energy Engineers
  • Wind Farm Designer
  • Wind Farm Electrical Systems Designer
  • Wind Farm Engineer
  • Wind Farm Siting and Development Consultant
  • Wind Power Specialist
  • Wind Turbine Controls Engineer
  • Wind Turbine Design Engineer
  • Wind Turbine Electrical Engineer
  • Wind Turbine Engineer
  • Wind Turbine Mechanical Engineer
  • Wind Turbine Performance Engineer

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.