SOC 51-9161 · BLS relative AI exposure

Computer numerically controlled tool operators

Also called Computer Numerical Control Machine Operator · Computer Numerical Control Machinist · Computer Numerical Control Operator · Machine Operator

High

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 42.1 million workers.

Workers, 2025
170,000
BLS projection to 2035
−9.4% projected
Median wage, 2025
$50,690
Typical education
High school diploma or equivalent

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

On a light page, end the frame’s address with ?theme=light. Preview it light.

Cite
CSV Post on X

The 27 tasks O*NET lists · 1 seen in every usage sample · 22 never

In every sample 1 In half or more 3 In under half the samples 1 Never seen 22

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

−9.4% projected

  1. This job −9.4%
  2. High exposure +3.1%
  3. All 831 jobs +3.5%

From 170,000 to 154,100. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Production & Manufacturing

+24% since February 2020

As a table
MonthProduction & ManufacturingMedian sector
Feb 2020 100.5 100.0
Feb 2021 137.4 104.2
Feb 2022 201.6 172.0
Feb 2023 162.6 146.2
Feb 2024 132.5 119.9
Feb 2025 111.5 108.8
Feb 2026 118.6 106.6
2 October 2026 124.5 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

10%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 2 points below the median job (11%)

4–19% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 27 tasks, most often seen first
  1. Implement changes to machine programs, and enter new specifications, using computers. 2 of 2
  2. Enter commands or load control media, such as tapes, cards, or disks, into machine controllers to retrieve programmed instructions. 5 of 7
  3. Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures. 4 of 7
  4. Write simple programs for computer-controlled machine tools. 4 of 7
  5. Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences. 2 of 7
  6. Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces. 0 of 7
  7. Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments. 0 of 7
  8. Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences. 0 of 7
  9. Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems. 0 of 2
  10. Calculate machine speed and feed ratios and the size and position of cuts. 0 of 7
  11. Transfer commands from servers to computer numerical control (CNC) modules, using computer network links. 0 of 7
  12. Remove and replace dull cutting tools. 0 of 7
  13. Check to ensure that workpieces are properly lubricated and cooled during machine operation. 0 of 7
  14. Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction. 0 of 7
  15. Monitor machine operation and control panel displays, and compare readings to specifications to detect malfunctions. 0 of 2
  16. Maintain machines and remove and replace broken or worn machine tools, using hand tools. 0 of 7
  17. Insert control instructions into machine control units to start operation. 0 of 7
  18. Modify cutting programs to account for problems encountered during operation, and save modified programs. 0 of 2
  19. Lift workpieces to machines manually or with hoists or cranes. 0 of 7
  20. Input initial part dimensions into machine control panels. 0 of 7
  21. Set up future jobs while machines are operating. 0 of 7
  22. Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production. 0 of 7
  23. Stack or load finished items, or place items on conveyor systems. 0 of 2
  24. Control coolant systems. 0 of 7
  25. Clean machines, tooling, or parts, using solvents or solutions and rags. 0 of 7
  26. Lay out and mark areas of parts to be shot peened and fill hoppers with shot. 0 of 2
  27. Examine electronic components for defects or completeness of laser-beam trimming, using microscopes. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 19% 14%
Feb–Mar 2025 10% 14%
Aug 2025 10% 10%
Nov 2025 14% 13%
Feb 2026 19% 12%
Apr 2026 4% 8%
May 2026 4% 11%
The 49 other titles O*NET lists for this job, A to Z
  • Aircraft Metals Technician
  • Automated Cutting Machine Operator
  • Automated Equipment Operator
  • Automation Machine Operator
  • CNC Gear Operator (Computer Numerical Control Gear Operator)
  • CNC Laser Operator (Computer Numerical Control Laser Operator)
  • CNC Lathe Operator (Computer Numerical Control Lathe Operator)
  • CNC Machine Operator (Computer Numerical Control Machine Operator)
  • CNC Machine Operator (Computer Numerically Controlled Machine Operator)
  • CNC Machinist (Computer Numerical Control Machinist)
  • CNC Machinist (Computer Numerically Controlled Machinist)
  • CNC Mill Operator (Computer Numerical Control Mill Operator)
  • CNC Milling Machine Operator (Computer Numerically Controlled Milling Machine Operator)
  • CNC Operator (Computer Numeric Control Operator)
  • CNC Operator (Computer Numerical Control Operator)
  • CNC Router Operator (Computer Numerical Control Router Operator)
  • CNC Set Up Operator (Computer Numerical Control Set Up Operator)
  • CNC Shot Peening Operator (Computer Numerically Controlled Shot Peening Operator)
  • CNC Tech (Computer Numerical Control Technician)
  • CNC Tech (Computer Numerically Controlled Technician)
  • Laser Beam Trim Operator
  • Laser Operator
  • Machine Operator
  • Machine Set Up Operator
  • Medical Numerical Control Operator
  • Metal Computer Numerically Controlled Operator (Metal CNC Operator)
  • Metal Jig Boring Machine Operator
  • Metal Numerical Control Machine Operator
  • Numerical Control Drill Press Operator
  • Numerical Control Jig Boring Machine Operator
  • Numerical Control Lathe Operator
  • Numerical Control Machine Operator
  • Numerical Control Machine Set Up Operator
  • Numerical Control Machine Tool Operator
  • Numerical Control Machinist Operator
  • Numerical Control Milling Machine Operator
  • Numerical Control Milling Machine Set Up Operator
  • Numerical Control Router Operator
  • Numerical Control Router Set Up Operator
  • Operator
  • Plastic CNC Machine Operator (Plastic Computer Numerically Controlled Machine Operator)
  • Plastic Numerical Control Machine Operator
  • PLC Tech (Programmable Logic Control Technician)
  • Printed Circuit Boards Numerical Control Drill Operator (PCB Numerical Control Drill Operator)
  • Robotic Machine Operator
  • Set Up Operator
  • Shot Peening Operator
  • Stencil Cutter
  • Welding Robot Operator

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.